NME-X-23ES-1G-P模組的Password Recovery

這陣子在這下面台3845上:

插入了一片Switch的Service Module: NME-X-23ES-1G-P

這片模組是透過3845的背版相連接的，當登入到3845之後，要進入這片的方式如下:
Router#service-module gigabitEthernet 2/0 session

上面的gi 2/0就是3845上面接到模組的背版介面，以session即可連入。

如果是正常的情況要做密碼回復(Password Recovery)，只要到Cisco這個便利的網站:
http://www.cisco.com/en/US/products/sw/iosswrel/ps1831/products_tech_note09186a00801746e6.shtml
就能找到。

但… NME-X-23ES-1G-P這片模組比較糗的是，當你重開Router時，Switch也開好了@@
不知道怎麼進行Rest，其實方法很簡單，如下:

Step.1 重設NME-X-23ES-1G-P模組密碼:
Router#service-module gigabitEthernet 2/0 password-reset
Do you want to proceed with password reset process?[confirm]
Starting password reset process...
Wait for 50 secs for password reset process to complete
Password reset process is complete...

[Resuming connection 1 to 192.168.10.253 ... ]

重設好之後會再登入Switch
switch:

Step.2 初始化Switch
switch: flash_init

Initializing Flash...

flashfs[0]: 503 files, 7 directories

flashfs[0]: 0 orphaned files, 0 orphaned directories

flashfs[0]: Total bytes: 32514048

flashfs[0]: Bytes used: 19305984

flashfs[0]: Bytes available: 13208064

flashfs[0]: flashfs fsck took 9 seconds.

...done Initializing Flash.


switch:

Step.3 備份開機檔config.text
switch: rename flash:config.text flash:config.text.bak

Step.4 開機
switch: boot

Loading "flash:c3750-ipbase-mz.122-35.SE5/c3750-ipbase-mz.122-35.SE5.bin"...@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

File "flash:c3750-ipbase-mz.122-35.SE5/c3750-ipbase-mz.122-35.SE5.bin" uncompressed and installed, entry point: 0x3000

executing...
(原來NME模組上有自已的IOS耶~)

Step.5 設定新密碼
Would you like to enter the initial configuration dialog? [yes/no]: no
Switch>en
Switch#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Switch(config)#enable password Mypass123
Switch(config)#exit
Switch#write
Switch#copy running-config startup-config
Destination filename [startup-config]?
Building configuration...
[OK]
Switch#reload